Nordson Coolwave 2610 - Torque Specifications for Lamphead Fasteners

Parts
7-5
Part 1105120-03
E 2015 Nordson Corporation
NoteQuantityDescriptionPartItem
28 −−−−−−
S WASHER, flat, regular, M4, brass
AR
29 −−−−−−
S WASHER, lock, split, M4, brass
AR
30 −−−−−−
S SCREW, pan head, recessed, M4 x 16
AR
31 983416
S WASHER, lock, internal, M4, steel, zinc
AR
32 −−−−−−
S NUT, hex, w/external toothed washer, M5
AR
33 −−−−−−
S SCREW, pan head, Phillips, M4 x 40, steel
AR
34 −−−−−−
S NUT, hex, w/external toothed washer, M4
AR
35 −−−−−−
S SCREW, truss, M4 x 10, Phillips, steel, zinc
AR
36 −−−−−−
S SCREW, pan head, slotted, M4 x 8, brass
AR
NOTE A: Order the correct bulb for your application from the list on page 7-10.
B: Recommended spare part. Keep this part in inventory to avoid unplanned downtime.
C: Order the correct reflector for your application. A kit includes one reflector. To replace both, order 2 kits.
D: Order the correct reflector and bulb mounting kit for your reflectors. Kit includes 2 TPFE reflector
supports, 2 bulb spring retainers, 4 M3 x 10 screws, and 4 M3 lock nuts.
E: Retainer kit includes 2 reflector retaining brackets. If you are not sure what type of reflectors, supports,
and retaining brackets you have, refer to page 6-7.
F: MERV4 blue filters are standard. For dirty environments, use MERV11 orange filters.
Both are 270 x 370 mm.
NS: Not Shown
AR: As Required
Torque Specifications for Lamphead Fasteners
Item Description Torque
11 SCREW, truss, M4 x 10, Phillips, steel, zinc
1.18−1.57 NSm (0.87−1.16 lb-ft)
12 SCREW, button head, socket, M3 x 4, zinc
0.50−0.65 NSm (4.5−6.0 lb-in)
13 SCREW, button head, socket, M3 x 10, zinc
0.34−0.57 NSm (0.25−0.42 lb-ft)
18 MACHINE SCREW, hex, M6 x 20, zinc
2.26 NSm (20 lb-in)
21 SCREW, pan head, recessed, M4 x 6, zinc
1.18−1.57 NSm (0.87−1.16 lb-ft)
23 SCREW, slotted pan head, 6−32 x .250 in.
0.51−0.68 NSm (0.37−0.49 lb-ft)
26 NUT, lock, nylon, M3, steel, zinc
0.51−0.68 NSm (0.37−0.49 lb-ft)
33 SCREW, pan head, phillips, M4 x 40, steel
1.18−1.57 NSm (0.87−1.16 lb-ft)
34 NUT, hex, w/external toothed washer, M4
1.18−1.57 NSm (0.87−1.16 lb-ft)
35 SCREW, truss, M4 x 10, Phillips, steel, zinc
1.35 NSm (12 lb-in)