Nordson Coolwave 2610 - Optional Lamphead Mounting Kit

Parts
7-13
Part 1105120-03
E 2015 Nordson Corporation
Optional Lamphead Mounting Kit
See Figure 7-6.
Item Part Description Quantity Note
− 1106333 KIT, bracket, adjustable, 10 in. lamphead
1 −−−−−−
S BRACKET, adjustable, lamphead, UV
1
2 −−−−−−
S PLATE, interface, 10 in. lamphead
1
3 981340
S SCREW, socket, 5/16−18 x 0.750 in., black
8
4 982432
S SCREW, pan, recessed, M5 x 16, zinc
4
1
2
3
4
Figure 7-6 Optional Lamphead Mounting Bracket Kit
Mounting Kit Installation
1. Install the mounting plate (2) on the bracket (1) with four 5/16−18
socket-head screws (3).
2. Install the mounting plate on the lamphead with four M5 x 16 pan-head
screws(4). Three sides of the lamphead have M5 threaded mounting
holes that match up to the mounting plate holes.
3. Mount the bracket on a suitable surface or rack, using the extra four
5/16−18 socket-head screws (3).
Use the bracket handles to tighten and loosen the pivot joints and position
the lamphead as desired.