Nortek 2GIG GC3e Series Installation And Programming Guide

Copyright © 2019 Nortek Security & Control LLC
71
Panel Programming Reference
This table summarizes the system’s panel programming questions, the available settings for each question, and each
question’s factory-default setting.
Panel Programming Questions
Question
Number
Question Text Available Settings Factory Default Setting
Q1 Enter installer code (4 digits) Unique 4-Digit Number 1561
Q2 Lock installer programming Disabled (Full Access)
No Access
Limited Access
Disabled (Full Access)
Q3 Lock default programming Allow Reset of All Defaults
Allow Limited Reset of Defaults
Do Not Allow Reset of Defaults
Allow Reset of All Defaults
Q4 Exit delay, in seconds (45-120) 45-120 Seconds ‡60 Seconds
Q5 Entry delay 1, in seconds (30-240) 30-240 Seconds ‡30 Seconds
Q6 Entry delay 2, in seconds (30-240) 30-240 Seconds ‡45 Seconds
Q7 Remote services provider None
Alarm.com
Alarm.com
Q8 2-way voice Disabled
Stay online
Stay online, including fi re and CO alarms
Stay online
Q9 Disable siren after two-way audio Enabled
Disabled
Audible
Q10 Police emergency key Disabled
Audible
Silent Panic
Audible
Q11 Fire emergency key Disabled
Audible
Audible
Q12 Emergency key Disabled
Audible
Q13 Quick arming Enabled
Disabled
Enabled
Q14 Auto stay Enabled
Disabled
‡Enabled
Q15 Exit delay restart Enabled
Disabled
‡Enabled
Q16 Allow quick exit Enabled
Disabled
Enabled
Q17 Quick bypass Enabled
Disabled
Disabled

Nortek 2GIG GC3e Series Specifications

General

Brand	Nortek
Model	2GIG GC3e Series
Category	Security System
Language	English