Copyright © 2019 Nortek Security & Control LLC
84
A confi rmation dialog appears when the replacement is
fi nished.
Smart Home Devices – Replacement Finished
4. Tap OK to close the confi rmation dialog.
5. Tap to return to the Smart Home Settings
menu.
Associating Z-Wave Devices
The Association function provides a means of enabling
individual network devices to communicate directly with
each other.
To associate Z-Wave devices:
1. At the Home screen, tap System Settings.
Home—System Settings
2. Enter the Master User Code to access the System
Settings screen.
3. At the System Settings menu, tap Smart Home
Settings on both Control Panels.
System Settings—Smart Home Settings
4. At the Smart Home Settings menu, tap Device
Association.
Smart Home Settings—Advanced Settings
5. At the Z-Wave Association screen, tap the
Manage button next to the device that will act as the
controller.
Z-Wave Association—Manage
To Next Page
Loading...
