Copyright © 2019 Nortek Security & Control LLC
33
Attaching to a Wireless Network
Attach to a Wireless Network
1. Navigate to Installer Toolbox menu and tap Network
Settings.
Installer Toolbox
2. Tap Wireless.
Wireless Selection
A list of available networks will be displayed.
3. Tap Network to connect to.
Select Wireless Network
4. Enter network password and tap Next.
Keyboard Entry Screen
You will see the IP Address and other network information.
Wireless Network Setup
Note: This WiFi connection only connects the panel to
the local network. WiFi is required for connecting wireless
touchscreens to the GC3 Panel.
Selection Buttons
Refresh
Network Options
Tapping Refresh will refresh the list of available networks.
To Next Page
Loading...
