Copyright © 2019 Nortek Security & Control LLC
80
2. At the Smart Home Settings menu, tap
Rediscover Network.
Smart Home Settings—Rediscover Network
3. At the Rediscover Network screen, tap Start.
Rediscover Network—Start
While the system is rediscovering the network it displays
the status of each node as it is checked.
Rediscover Network—Status
When the rediscovery is complete, the Rediscover
Network screen with the Start button (shown above)
appears again.
View All Devices
The View All Devices function lists all Z-Wave devices
in the Control Panel network and provides the following
options, depending on the type and current status of a
device:
»
Confi gure
»
Hide/Unhide
»
Identify
»
Remove
»
Rename
»
Replace
To view all network devices and access these options:
1. Navigate to the Smart Home Settings menu. See
“Navigate to the Smart Home Settings Menu.”
2. At the Smart Home Settings menu, tap View All
Devices.
Smart Home Settings—View All Devices
3. At the Smart Home Devices screen, review the list
of devices. If you have added several devices, you
can swipe up and down to move through the list.
Smart Home – View All Devices
4. To view the options available for a device, tap the
menu button ( ).
To Next Page
Loading...
