Copyright © 2019 Nortek Security & Control LLC
36
4. Select the Edit icon for Gateway and enter the
desired Gateway Address.
Gateway Address
5. Select the Edit icon for DNS Server and enter the
desired DNS Server Address.
6. Tap Confi gure Network Settings.
Confi gure Network Settings
Network Test
Testing the Broadband network connection
1. Navigate to the Installer Toolbox menu and tap
Network Test.
2. Tap Start.
3. The Network test will run:
»
If successful green dots will appear under each test:
LAN, Internet, and Backend.
»
If a failure is detected a red dot will appear under
the test.
»
LAN – Connection to Local Network
»
Internet – Connection to Internet
»
Backend – Connection to Alarm.com
NOTE: Correct any network issues to resolve
broadband connectivity
4. Tap to return to Installer Toolbox
To Next Page
Loading...
