31
Requesting Access with a Visitor Call
• Navigate to Resident Directory using Navigation keys.
• Scroll through the alphabet to the rst letter of the last name.
• Press Enter.
• Scroll through name list to desired entry.
• Press Enter to call.
• If the visitor already knows the resident’s directory number, they can enter the directory number to call the resident.
• The system dials the resident’s telephone number to establish 2-way communications.
NOTE: The resident’s telephone number will never be displayed to the visitor.
• If the resident is using the telephone at the same time a visitor calls, the display will indicate to the visitor that the line is busy.
• The resident answers the call and converses with the visitor to determine if access will be granted.
• The resident can use their telephone’s keypad to grant access activating Relay Channel “A” by pressing
. After access is granted, the
system will disconnect the visitor and resident call.
• The resident can disconnect the visitor without granting access by pressing
or by hanging up.
NOTE: The telephone keys that the resident presses can be customized for the installation.
• The length of time the visitor is allowed to talk can be programmed from 30-300 seconds.
3
AFTER SCROLLING, ENTER THE
RESIDENT DIRECTORY NUMBER
AND TALK WITH RESIDENT
ENTER RESIDENT
NUMBER OR SCROLL
THROUGH TO
RESIDENT’S NAME
2
VISITOR
1
USE NAVIGATION
KEYS TO SCROLL
TO DIRECTORY
Test and Maintenance Operations
Prior to installation, ensure that all inside wiring is secure. Each unit should be checked annually for any loose wire connections.
Impaired Operation
Units are designed to operate under adverse environmental conditions. Under normal circumstances, they will function properly regardless of outside
conditions. However, units do not have secondary power sources and cannot function without direct continuous power. If a unit is damaged by
natural causes or deliberate vandalism, it may not function properly depending on the level of damage.