Nortek EC Series Installation Manual

5
SINGLE-GANG
MOUNTING WITH
ADAPTER PLATE
WIEGAND
ACCESSORIES
TELEPHONE ENTRY
& ACCESS CONTROL
SYSTEM
GENERIC
WIEGAND
CARD READER
OR
WIEGAND
OUTPUT
RECEIVER
SINGLE-GANG
MOUNTING WITH
ADAPTER PLATE
MULLION
MOUNTING
TELEPHONE ENTRY
& ACCESS CONTROL
SYSTEM
WOR
Wiegand Devices
The two WIEGAND format inputs are available to connect WIEGAND devices.
Virtually all 26 through 64 bit WIEGAND output devices from other manufacturers
can be used with EC / EN Series units.
2N1 Reader
The 2N1 reader is a 125kHz Multi-Protocol
Reader with RFID technology. Supports certain
HID, AWID & Farpoint 125 kHz proximity
protocols. Mullion and Single-Gang (Shown)
mounting options.
Accessory Overview
Wiegand Output Receiver (WOR)
The WOR is used as a wireless access control
interface for block coded digital transmitters.
It receives signals from transmitters, adds
a facility code to the data, and sends the
information via a 5-wire connection to a
Wiegand input commonly available on most
access control panels.
2N1 Reader

Nortek EC Series Specifications

General

Brand	Nortek
Model	EC Series
Category	Intercom System
Language	English