Nortek Vectrino - Correcting for Sound Speed Errors; Error Codes and Status Codes

NORTEK VECTRINO VELOCIMETER
User Guide
21
Rev. C • 10.2004
Correcting for Sound Speed Errors
If you enter the wrong salinity, the Vectrino will compute the wrong sound
speed. You can correct velocities (V) for sound speed errors using the following
equation:
New sound speed
Old sound speed
V
NEW
= V
OLD
•
Error Codes and Status Codes
exvcccbb
# beams – 1
# cells – 1
velocity scaling (0 = mm/s, 1 = 0.1mm/s)
not used
error (0 = no error, 1 = error condition)