Nortek Vectrino - Chapter 4 - Initial Preparations; Inspect the Received System

NORTEK VECTRINO VELOCIMETER
User Guide
23
Rev. C • 10.2004
CHAPTER 4
Initial Preparations
We recommend the following procedure to prepare your new Vectrino
Current Meter for future successful operation:
1
Verify that you have received all parts.
2 Install the Vectrino Software on a PC.
3 Perform a functional test of your new Vectrino.
4 When you are ready to make your measurements, mount the Vectrino in ac-
cordance with the guidelines provided in Mounting guidelines (in this chap-
ter).
Inspect the Received System
The following should be included in the Vectrino Shipment:
1
Transportation box
2 Vectrino current meter
3 Tool k it
4 Power cable
5 Power supply
7 Signal cable
8 Packing list
9 War ranty card
10 Vectrino software CD
11 Vectrino User Guide