Nortrac 82XTC - Appendices; Tractor Fuel, Oils and Solutions

Appendices
101
10. Appendices
10.1 Tractor Fuel, Oils and Solutions
Table 10-1 Oils and Solutions
Application
location of oils
and solutions
Oils and Solutions
Fuel tank
Domestic
standard
GB/T 252
compliant light
diesel oil
Above
20°C
（4～20°C）
（-5～4°C）
（-14～-5°C）
(-29～-35°C）
No.10
No.0
No.-10
No.-20
No.-35
International
standard
Adopt ASTM D-975 fuel oil. Under general air temperatures, use 2-D grade oil; when
ambient temperatures are below 5°C, use 1-D grade oil. Fill the engine fuel and oil
strictly following the instructions given in the accompanying documents.
Engine sump
Domestic standard
Diesel engine sump, injection pump and governor use CF-4 grade equivalent diesel
engine oils （GB11122）. Do not replace with common diesel engine oil. Fill the engine
fuel and oil strictly following the instructions given in the accompanying documents.
When ambient temperatures are within or above the range of -10°C～+50°C,
use 20W-50 CF-4 diesel engine oil.
When ambient temperatures are within the range of (~20°C ~+50°C), use 15w~40
CD diesel engine oil.
When ambient temperatures are within the range of -25°C～+40°C, use 10W-40
CF-4 diesel engine oil.
When ambient temperatures are within the range of-30°C～+40°C, use 5W-40
CF-4 diesel engine oil.
International standard
Engine sump, injection pump, and governor use the oils with their viscosity grades
compliant with SAE viscosity classification. Below -5°C, use SAE 10W oil; above
-5°C, use all-season SAE 15W/40 multi-grade oil. Quality class should comply with
API CD grade standard.
Water radiator
Use a 50/50 water/antifreeze blend at all temperatures.
Gearbox-rear
axle, hydraulic
Domestic
standard
N100D dual-purpose transmission/hydraulic oil. Implementing standard:
Q/LWZ B119