Remove any grease used for anti-rusting.
Reopen the various sealed up nozzles and clean the tractor.
Check coolant, machine oil, and diesel fuel and lubricate all of the lubrication points according to
the provisions.
Remove any anti-rust agent in the belt grooves and reinstalls and/or adjust the belts.
(See: Engine Instruction for Use and Maintenance)
Reinstall the battery and check the terminals.
Check that all of the circuits, hoses and lines are properly connected.
Check air pressure in tires.
NOTE: Please refer to the ―Engine Instruction for Use and Maintenance‖ for details on engine storage and
removing tractor from storage.
To Next Page
Loading...
