50
3. Observe surface contact time.
• Ensure the Meter surface stays wet for the
recommended time and is allowed to air dry
for an additional 1 minute.
NOTE: If you must rewet the surface of the
Meter, use a new, fresh wipe.
4. Dispose of wipes
• Dispose of the used germicidal wipes in a
standard waste container.
5. Wash and sanitize hands.
• Wash your hands thoroughly with
soap and water.
Basic Upkeep
PN62659B1 Lactate Plus IFU EN.indd 50PN62659B1 Lactate Plus IFU EN.indd 50 8/5/22 11:55 AM8/5/22 11:55 AM
To Next Page
Loading...