深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
35
：Add a base plate to the model and set
the thickness of the base plate (reference range 0.2-0.6mm).
： Here you can delete all the generated supports (select a support and
press the DEL key to delete the specific support)
Support shape
：
Set the support radius and height,
which can be adjusted according to the
size of the object, suggested value
：
1. Head top: 0.5-0.8mm
2. Head bottom: 0.7-1.5mm
3. Height: 1-2mm
Example
：
To Next Page
Loading...