深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
38
（2）Select printer model “L3130-K40”, other models correspond to the other printers of
Nova3D.
（3）The layer thickness is generally selected to be 0.05mm, taking into account accuracy,
printing time, and hardware characteristics. 0.05mm is almost the most reasonable choice.
（ 4 ） The exposure time and bottom layers exposure time are related to the resin. The
default value is the optimum value after testing, the user can adjust according to the actual
effect. (Note: The maximum exposure time is 150 seconds).
Click the “Slice” icon, select a file directory, enter the name of the saved file, and click
"Save" to wait for the end of the slice.
5．Connectivity
5.1．Ethernet Connection:
Click on the right side of NovaMaker title bar to enter the printer management
interface, then click "+" on the upper right side to display a pop-up box for "Printers Add
Guidelines", select the first item (the printer has not been configured on the network...) and
To Next Page
Loading...