深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
49
3. Fill the vat with new resin.
4. Install the UV cover back on the printer.
11. Available Materials
The complete offer of materials is available at:
http://www.nova3dprinter.com/material.html
Material Technical Data Sheets and Safety Data Sheets can be found at the same website.
When 3D printing with the Nova3D ELFIN, the Manufacturer recommends using Nova3D
certified materials, ensure that the resin packaging is intact and to check whether the resin is
To Next Page
Loading...