深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
34
3．Adding Support
3.1．Auto Support&Manual Support
3.1.1．Auto Support
The software provides an intelligent support algorithm. When the model structure is
complicated, the auto support can be applied, the auto-generated support can meet most
printing needs. To ensure the success of printing, you can also increase the support density for
the lowest point part of the model.
3.1.2
．
Manual Support
When the model structure is relatively simple, you can choose manual support, and add
support at the lowest point part of the model.
3.2．Other Support Configuration
To Next Page
Loading...