Need help?Do you have a question about the NOVA3D ELFIN and is the answer not in the manual?
General| Light Source | 405nm UV LED |
|---|---|
| Connectivity | USB |
| Resin Type | 405nm UV Resin |
| Supported Materials | 405nm UV Resin |
| Bed Leveling | Manual |
| Software | NOVA Maker |
| Power Supply | 100-240V, 50/60Hz |
| Layer Resolution | 0.025-0.1mm |
| Printing Technology | LCD Stereolithography |
| XY Resolution | 50 microns |
| Z Axis Resolution | 10 microns |
| Printing Speed | 30 mm/h |
| Print Bed | Aluminum |
Guidelines for safe workplace, including cleanliness and equipment setup.
Precautions for safe electrical operation, avoiding modifications and using approved parts.
Warnings about movable components and avoiding contact during operation or maintenance.
Information on burn risks and recommended storage temperature conditions.
Guidelines for safely stacking, securing, and handling packages during transport.
Compliance with FCC rules on interference and signal emissions.
Explains the purpose and function of each tool included with the printer.
Overview of software's main sections and their controls.
Instructions to open and load 3D models into the software for printing.
Explains how to add support structures to 3D models for successful printing.
Details on setting up print parameters and slicing the 3D model.
Guides on connecting the printer to a network via Ethernet or Wi-Fi.
Steps to transfer the sliced file to the printer for printing.
Steps to prepare the printer and check components before starting a print.
Instructions for initiating the printing process after preparation.
Guidance on cleaning and curing printed models after removal.
Procedure for safely removing and replacing resin in the vat.
To Next Page