深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
46
it’s necessary, you can also clean the resin vat using the same liquid.
4. Clean the resin vat with a paper towel. You can also use resin detergent and alcohol for that
purpose.
5. Clean the platform, LCD screen and the resin vat. After that, reinstall the resin vat into the
printer and fasten it, and then install the platform back to the Z-Axis guide of the printer and
secure it with the screw.
To Next Page
Loading...