NovaStar VX6s - Navigating the VX6 s Menu System; Basic Operation with Knob and ESC

VX6s All-in-One Controller
User Manual
3 Menu Operations
7
3 Menu Operations
The VX6s has powerful functions and is easy to operate. By using the knob and ESC
button, you can perform any operations. Besides, you can switch the input sources
by pressing only one button.
3.1 Operation Instructions
Knob

On the home screen, pressing the knob enters the operation menu screen.

On the operation menu screen, rotating the knob selects a menu item, and
pressing the knob confirms the selection or enters the submenu.

When a menu item with parameters is selected, you can rotate the knob to
adjust the parameters. Please note that after adjustment, you need to press the
knob again to confirm the adjustment.
ESC
This is a return button used to exit current menu or operation.
Button Locking and Unlocking
Hold down the knob and ESC button simultaneously for 3s or longer to lock or unlock
all the buttons.
3.2 Screen Brightness
This function is used to adjust the LED display brightness.
On the home screen, press the knob to enter the menu. Then, rotate the knob to
select Screen Brightness and press the knob to enter the brightness adjustment
status. At last, rotate the knob to adjust the brightness value. After you set the
brightness value, press the knob to confirm it.