Need help?Do you have a question about the Novatech Bitronics PowerPlex II and is the answer not in the manual?
General| Brand | Novatech |
|---|---|
| Model | Bitronics PowerPlex II |
| Category | Transducer |
| Language | English |
Details on product warranty against defects and customer assistance.
Information for ensuring safe product installation and handling.
Defines the meaning of symbols and labels used in the documentation and on the equipment.
Warning regarding Class A industrial device emissions and potential interference.
Procedures for safe decommissioning and proper disposal of the equipment.
Overview of the PowerPlex II (PPX II) synchronizing Ethernet transducer.
Highlights the main capabilities and features of the PPX II.
Detailed electrical and operational specifications of the device.
Configuration and specifications for optional digital inputs and outputs.
Information on accuracy standards met by the PowerPlex II.
Details on environmental ratings, enclosure protection, and applicable standards.
General guidance and warnings for the safe installation of the instrument.
Instructions for checking the instrument for shipping damage upon unpacking.
Requirements for connecting the device to protected earth ground.
Guidance on selecting and installing appropriate fuses for overcurrent protection.
Instructions for mounting the instrument, including rack panel mounting options.
Details on powering the PPX II via auxiliary connections and indicators.
Information on connecting Voltage Transformer (VT) inputs for monitoring voltage buses.
Instructions for connecting Current Transformer (CT) inputs for current measurement.
Details on the PPX II's Ethernet ports and connectivity features.
Configuration of IP address, subnet mask, and gateway for network connection.
Procedures for firmware upgrades and managing configuration files via Ethernet.
Information on the optional serial port for RS232 or RS485 communication.
Details on the optional display port for tethered display or serial communication.
How to configure display screens, including enabling/disabling and custom screens.
Explanation of button functions for navigating display screens and setup mode.
Summary of self-test results, fault indications, and corrective actions.
Information on the optional IRIG-B port for system time regulation.
Explanation of the Energy Pulse LED and its function in monitoring energy.
Methods for configuring the PPX II using the web interface or front panel.
Introduction to the PPX II's internet-compatible HTML web page interface.
Setup and use of passwords for controlling access to PPX II configuration and functions.
Step-by-step guide for configuring the PPX II using its web page interface.
Guide to navigating the PPX IITD's setup menu using the front panel buttons.
How to store and use CT and VT turns ratios for measurements in primary units.
Details on the PPX II's current inputs, including internal CTs and dynamic range.
Explanation of the PPX II's voltage connection method and measurement capabilities.
Calculation and sign convention for per-phase and total power factor.
Calculation of per-element Watts, VAs, and VARs based on voltage and current samples.
How to configure line and transformer loss compensation for accurate energy.
Maintenance of positive and negative Watt-hours, VAR-hours, and VA-hours.
Explanation of demand measurement principles and PPX II demand value generation.
Calculation of harmonic measurements, including Voltage Distortion (THD) and Current Distortion (THD/TDD).
Using the Heartbeat State Counter and Health Check register for instrument status.
A comprehensive list of all available measurements and settings.
Guidelines on calibration checks and principles for instantaneous measurements.
Wiring diagrams for connecting CT and VT inputs to the PPX II.
Guide to resolving common issues with Ethernet connections and Link LED status.
How to configure display screens, including enabling/disabling and custom screens.
Examples of standard display screen formats for instantaneous measurements.
Visual representations of standard display screens for the PPXIITD.
To Next Page
