82
Scenes
Scenes let you assign multiple patterns and pattern chains within a project to a single pad, allowing
you to trigger part of a song easily. Scenes themselves can also be chained to arrange much longer
sequences and thus build up complete song structures.
Scenes are accessed in Mixer View: press Mixer to open this:
Synth 1 Drum 4Drum 3Drum 2Drum 1Synth 2 MIDI 1 MIDI 2
(Pulsing
bright/dim)
Scene pads
The two lower rows of pads in Mixer View represent the 16 Scenes that are available in Circuit Tracks.
In a new Project, all the pads will trigger Pattern 1 of all eight tracks as no Pattern Chains have been
defined or assigned yet. The first (Pad 17) will be pulsing bright green. which indicates that the
currently playing Patterns correspond with the last selected Scene (Scene 1 by default).
Assigning Patterns to Scenes
Open Patterns View and define all the Pattern Chains for each track that are to constitute a Scene.
Change to Mixer View, press and hold Shift: the Scene pads change colour to dim gold. Press a Scene
pad (while still holding Shift) – it will light bright gold while pressed, indicating that Patterns are now
assigned to it.
To Next Page
Loading...