Novation FLkey 49 - Fader Mode: Custom

Fader Mode: Custom
This fader mode gives you freedom over whichever parameters you wish to control and up to nine
simultaneously. Using Novation Components, you can edit the messages the faders and fader buttons
send in Custom Mode.
To map most parameters in FL Studio to the Faders or buttons on the FLkey:
1. Right-click a parameter in FL Studio.
2. Select one of two remote control modes (explained below).
3. Move a fader to map the parameter to the fader you moved.
Remote control modes:
• Link to controller - creates a connection between one instance of the parameter and the pot,
regardless of focus. This link works project-wide.
• Override global link - creates a link across all projects, unless overwritten by a ‘per-project-link’.
As this depends on the focused instance, you can control many parameters with one pot.
FLkey User Guide
33