User Manual TXLD0012
P/N T2-UM-E-ENG Rev 10 Novoxel.com Page | 39
This step should be performed as follows:
Removal of the Handpiece’s Distance Gauge
After removal of the Distance Gauge, the exposed Tip may be hot. The operator and/
or any other person/s standing nearby may be injured if contact with the distal end of
the Handpiece occurs. Always perform Distance Gauge removal with both hands
holding the Handpiece and facing the Tixel2 Console.
Place the DG on a clean and dry surface.
To Next Page
Loading...