OPERATION 10. HOW TO USE APPLIED FUNCTIONS (OPERATION MODE)
(4) Monitoring the rotation speed of ABSOCODER’s shaft
The rotation speed of ABSOCODER’s shaft can be check during the operation.
Name Descriptions
①
When the rotation speed is displayed, the following figure is indicated.
② DOG, PROGRAM
display
Displays the rotation speed.
The display unit is 1 r/min.
Indicates “1234 r/min” in the above display example.
③ MODE indicator RUN LED is ON: Indicates the operation (RUN) mode.
④
If there is no error, this indicator will turn ON when selecting the operation (RUN) mode.
This indicator is same condition as “System ready output signal” of the output connector.
③
①
④
②
To Next Page
Loading...
