To Next Page

To Previous Page

OPERATION 7. HOW TO USE BASIC FUNCTION

7-4. Turns ON the Power Supply

The VS-5F Series doesn’t have any power supply switch; therefore, use external switch for turning ON / OFF the

power supply.

Before turning ON the power supply, be sure that the wiring is correct and the screws of terminal block are

securely tightened.

The screen displays as below figure when turning ON the power supply for the first time after delivery.

After turning ON the power supply, the screen displays one second.

Changes the parameter setting (PRM) mode automatically.

The screen displays below figure when changing mode to the operation (RUN) mode or

switch setting (SET) mode.

In the case of restarting the power supply, keeps the mode just before turning OFF.

Operation (RUN) mode : RUN LED is ON

Switch setting (SET) mode : SET LED is ON

(1) (2) (3)

(1): Software specification (Displays 00.)

(2): Software version

(3): VARICAM model

：VS-5F(-1) ：VS-5FD(-1) ：VS-5FX(-1)

Questions and Answers:

Need help?

Do you have a question about the NSD VARICAM VS-5F-1 and is the answer not in the manual?

NSD VARICAM VS-5F-1 Specifications

General