MAINTENANCE 12. TROUBLE SHOOTING
12-2. Procedure Contents after Replacing
Implement the following measures after replacing VARICAM, ABSOCODER, and sensor cable.
In the case of replacing
ABOSOCODER
Implements the following measures after the replacement.
1. Cancels an error either one of the following methods.
- Presses [CLR] or [ON / OFF] key.
- Inputs the error cancel signal from external.
2. Sets the origin point or current position values.
the sensor cable
Implements the following measures after the replacement.
1. Cancels an error either one of the following methods.
- Presses [CLR] or [ON / OFF] key.
- Inputs the error cancel signal from external.
2. Sets the origin point or current position values.
In the case of replacing
Sets all the parameter and switch output after the replacement.
To Next Page
Loading...
Need help?
General
