14
CAUTION
CAUTION
CAUTION
NOTICE
9. How to Use Tip Cover S (Option)
Grip the Tip Cover S and insert it to the Tip.
To remove, grip the Tip Cover S and the handpiece & pull. (Fig. 27)
The Tip Cover S is not designed for use as a Tip changing tool.
Carefully insert the Tip
into the Tip Cover S. Avoid
injuring the fingers.
10. Handpiece Holder
While the Handpiece is not in use, put the Handpiece in the
Handpiece Holder.
The Handpiece Holder is adjustable. (Fig. 28)
11. Care and Maintenance
(1) Cleaning of Optic Fiber (Varios 970 LUX)
Wipe the debris off the end of the Optic Fibers at the
handpiece with alcohol soaked cotton swab. (Fig. 29)
Do not use any sharp pointed tools to clean the
Optic Fiber End Face. In case the light degridation,
contact your dealer.
Do not put excessive load to the Handpiece Holder
to prevent from breaking down and deformation.
To prevent injury, always mount Scaler Tip Cover (S).
Fig.27
Slit
Slit
Tip
Tip Cover
Tip-Handpiece Joint
Fig.28
Handpiece Holder
Fig.29
Optic Fiber End Face
To Next Page
Loading...
Need help?
General
