NSK VarioSurg - Mounting Irrigation Tube

11
English
Fig.6
Fig.7 Fig.8
Pump Knob
A
B
4) Make sure that the tube is inserted well behind the roller as shown in Fig. 9. If not, the tube may be damaged
or cut when the Pump Cover is closed.
5) Close the Pump Cover.
Fig.9
Roller
Fig.10
6-5 Mounting the Irrigation Tube
Mount the Irrigation Tube as shown in Fig. 6.
6-5-1 Mounting to the Irrigation Pump
1) Turn the Pump Knob on the side of the Control Unit 180 degrees to the right to open the Pump Cover.
2) Insert the Irrigation Tube (on the bottle side) into the Irrigation Pump, hitching it onto A in Fig. 7.
3) Insert the Irrigation Tube along the guide and fit it into B in Fig. 8.
Pump Knob