12
CAUTION
• Use only 500ml saline solution bottles. Never hang more than 800 grams to the hanger post.
• At any time, insure that there is enough saline solution inside the bottle.
6-5-3 Mounting to the Bottle
1) Close the Tube Clamp located between the Irrigation Tube Needle and the irrigation pump, as illustrated in
Fig.12.
2) Hook the bottle to the hanger post and insert the Irrigation Tube Needle into the Bottle Cap.
Bottle Cap
Irrigation Tube Needle
Fig.13
Tube clamp
Fig.12
Tube Cap
Fig.14
Non-Optic handpiece
CAUTION
Improper connection of the Irrigation Tube can lead to water leakage. Make sure that the Irrigation Tube and Water
pipe are connected tightly.
Water pipe
Fig.11Optic handpiece
3) Open the Tube Cap to supply air into the bottle.
6-5-2 Mounting to the Handpiece
Insert the end of the Irrigation Tube all the way into the Water pipe of the Handpiece (Fig. 11).
Water pipe
To Next Page
Loading...
