NSK VarioSurg - Page 14

13
English
6-6 Attaching the Tube Holder
Use the Tube Holder to bundle together the Handpiece Cord and
the Irrigation Tube. It is easier to fasten them onto the Handpiece
Cord first and, next, onto the Irrigation Tube.
CAUTION
Handpiece CordHandpiece Cord
Irrigation Tube
Irrigation Tube
Tube Holder
Tube Holder
Fig.15
CAUTION
6-7 Handpiece stand
Place the Handpiece horizontally on the Handpiece stand
(Fig. 17).
Fig.17
• Bundle the Handpiece Cord and the Irrigation Tube at a total of
7 locations as shown in Fig. 16.
• The tube may burst or come off the bottle if the Irrigation Pump
is activated with the tube bent, the Tube Clamp closed, or the
bottle empty.
Fig.16
• Make sure that the Tip does not contact the Handpiece stand (Fig. 18).
• Make sure that the Handpiece is placed on the Handpiece stand
horizontally, and not at an angle.
• To clean the Handpiece stand, wipe with a cloth dampened with alcohol.
Fig.18
No contact!
Horizontal Not horizontal