Need help?Do you have a question about the Nu-Set 7010 and is the answer not in the manual?
Product operates on 6V only; higher voltage causes irreversible damage not covered by warranty.
Keep unit in 'lock' position when not in use to maximize battery life and conserve energy.
Avoid forceful impacts and do not submerge the unit in water for optimal performance.
Reprogram the unit before use if it has been idle for a long period, with or without batteries.
Operate in an upright position for weatherability; ensure rubber seals are completely shut.
Keep the interior dry by cleaning moisture before closing the unit.
Lists the components included with the NU-SET Smart-Box, such as the lockbox, USB drive, batteries, and tools.
Diagrams illustrate the process of generating and transferring PINs and recording/downloading access logs.
Specifies the computer operating systems and USB port requirements for using the Smart-Box application.
Details the battery requirements, standby duration, and procedures for using external power when batteries are low.
Diagram and numbered list identifying key components of the Smart-Box, including shackle, keypad, ports, and battery compartment.
Detailed steps for unpacking, opening the vault, installing AA batteries, and closing the battery compartment.
Instructions for operating the shackle lock on the 7010 model, including rolling dials and positioning the shackle.
Procedure for changing the 4-number combination on the shackle using the included reset tool.
Steps for mounting the 7060 model lockbox, including positioning, marking, drilling, and securing the unit.
Guide on copying the NU-SET Smart-Box application folder to a local drive and running the 'Smart-Box.jar' file.
Process for registering a new Smart-Box by importing its access log using the USB drive and application.
Procedure to change master, program, report, and PC connection passwords within the application.
Instructions on generating PINs by duration, weekday/time windows, and one-time use via the application.
Steps to save PINs to a USB drive and then program them into the Smart-Box lockbox.
Guide on how to lock and unlock the Smart-Box using programmed PINs or the master password.
Procedure to download the lockbox access log to a USB drive using the report password.
Instructions to print generated PINs from the Pin Generation tab of the application.
Steps to set and confirm a new administration password to access the 'Administration' tab.
Procedure for backing up and restoring the application database, including registered serial numbers and PINs.
Details the terms of the limited, non-exclusive license granted for the Smart-Box design and application.
Outlines the one-year warranty against defects, what NU-SET will do, and what is not covered.
To Next Page
General