N5
Product Storage and Care
How to Take Emergency
Actions during Use Self-check Items
Stop using the product immediately and
remove the power plug if there is any
lightning.
Stop using the product immediately and
contact your supplier branch or our company
if you smell any burn or detect any smoke
from the product.
Stop using the product immediately and
consult with a doctor if any abnormality
occurs from the human body.
Turn off the power switch immediately,
stop using the product and contact our
company if you find out any failure or power
failure from the product.
Turn off the power switch, remove the power
plug immediately, and then contact our
company if you have poured water into the
product.
Caution
There might be risk of injuries or fire if you fail to check out the
following. Make sure that you check out the following.
Check before use
1. Is the power cord connected to an outlet?
2. Is the controller operating well?
3. Is the temperature indication displayed on the
temperature indicator window on the controller?
4. Is the temperature of the projector not too high?
5. Is the temperature of the auxiliary heating part not
too high?
6. Is the power supply for both the internal and external
projectors turned on?
7. Did you check out conditions for any damage to the
power cord or cable conditions?
Check after use
1. Is the controller power turned off?
2. Is the power lamp on the projector turned off?
3. Is the power switch turned off to the point?
4. Is the power cord separated from the outlet?
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
To Next Page
Loading...
