Before the Product Installation
Install the product at a flat floor.
(Otherwise, it might damage the product.)
Do not drop or shock the product.
(Otherwise, it might damage the product.)
Check out the applied voltage before any use.
(Otherwise, it is likely that the electrical shock or fire
occurs.)
Do not place any inflammable substance on the product,
such as candlelight or cigarette light.
(Otherwise, it is likely to cause the electrical shock or fire.)
Turn off the power switch during no use for a long time.
(Otherwise, it is likely to cause fire.)
Do not use the device in areas that are dusty or have
severe temperature fluctuations or where it can come
into contact with water.
(There are risks of electric shock and fire.)
N5
Production Installation and Use
Do not forcibly turn the controller.
(Otherwise, it might cause damage to the product.)
Move the product after separating the power supply from
connecting lines if the product is moved.
(Otherwise, it might cause electric shock, injury and/or
damage to the product.)
Do not install the product in a place with the frequent
access.
(Otherwise, the product might be damaged.)
Do not install the product in a place with much moisture
or water.
(Otherwise, the product might be damaged.)
Be careful not to expose the product to the direct sunlight.
(Otherwise, the product might be damaged.)
To Next Page
Loading...
