Page 25 of 54
14. Software update Touch PC
The software for the Touch PC is available as a zip file that needs to be unzipped to a USB stick.
This zip File can be downloaded from the exclusive area (Infocenter) on www.nussbaum-group.de
− Switch the machine off, connect the USB stick to one of the USB ports on the lower side of
the Touch PC
− Switch the machine on
− Touch the field in the right upper corner of the welcome screen two times
− Touch UPDATE
− Select „Update application with USB stick
− Touch Update and confirm the update
− After the Update has been done switch machine off and remove USB Stick
− Switch machine on, software version in upper right corner of the first screen needs to show
the latest version i.e 01.22.50.27
− If the software on the basic board is not of the latest version an error message will be
displayed and the update of the software of the basic board needs to be performed in order to
bring the machine to work
CAUTION:
Make sure that the software for the Touch PC is always updated FIRST
To Next Page
Loading...
Need help?
General
