Install and remove
sealing ring.
Install: Place the sealing ring
inside the sealing ring rack and
press into place. Ensure entire
sealing is snug behind sealing
ring rack. Sealing ring must be
installed before use.
After closing lid, the sealing ring
creates an airtight seal between
lid and cooker base.
Remove: Gently pull sealing
ring out from sealing ring rack
and clean after every use.
*NOTE: It is recommended to have
more than one sealing ring. The sealing
ring is an integral part of product safety.
Only use authorized NutriCook
™
sealing
ring or Replace your sealing ring every
12-18 months or when deformation or
damage is noticed.
CAUTION: Always check for cuts or deformations in sealing ring prior to cooking.
Failure to follow these instructions may cause food to discharge, which may lead
to personal injury or property damage.
install
remove
*CAUTION: Regularly inspect your
sealing ring for any damage as this will
aect the product safety. Sealing ring
may stretch over time. Do not use a
stretched or damaged sealing ring. If
puckering occurs, replace sealing ring.
22
To Next Page
Loading...
