14
1- Control Panel: Control panel includes LC display in order to control the device and
set the desired values by using 4 different keys.
2- Chamber Gasket: The silicon gasket prevents the leakage.
3- Biological Filter: The filter is used to generate a sterile environment inside the
chamber.
4- Shelf: Stainless steel shelf is easy to remove.
5- Glass Door: The door helps the user to observe the samples inside the chamber.
6- UV Socket: nUVeRay™ is connected to this socket when the user wants to use the
UV Disinfection program.
7- Door Switch: With the help of the door switch, visible and audible alarm activates
when the glass door is left open.
8- Humidity Tray: This humidity tray is used to generate humidity by means of the
distilled water inside the tray.
9- CO
2
Measurement Access Port: User could use the port in order to connect an
external measurement device and measure the CO
2
percentage inside the chamber.
10- Ambient Temperature Sensor: Measure instant ambient temperature by Pt-100
sensor.
11- Remote Alarm Port: When optional NuveWarn™ remote alarm system is
connected to this port, the user is notified in case of alarms. Optional AlerText™
GSM alarm module is also connected to this port.
12- CO
2
Tank Port: CO
2
connection is made via this input.
13- Biological Filter: This filter is used to maintain a sterile environment inside the
chamber.
14- Safety Thermostat: Heating process is stopped automatically by the safety
thermostat in case of uncontrolled overheating.
15- Power Switch: This switch is used to power on or off the device.
16- Power Supply and Fuses: In order to give energy to the device this power supply
input is used. Fuses protect the incubator from instantaneous voltage fluctuation in
mains supply.
To Next Page
Loading...
