16
Distilled water must be used in the humidity tray.
Figure 5
5.8.2. MOUNTING BIOLOGICAL FILTERS
Mounting the biological filter inside the chamber
Mount the biological filter into its place as in Figure 6.
Figure 6
Mounting the biological filter outside of the chamber
Mount the biological filter into “FILTER” port located at the back of the instrument as
shown in Figure 2.
5.8.3. CO
2
TANK CONNECTION AND REPLACEMENT
Place CO
2
upright and take necessary precautions for not falling over the tank.
After connected the regulator to the CO
2
tank, follow the steps bellow:
To Next Page
Loading...