Nuvoton Nu-Link-Pro - User Manual

Nuvoton Nu-Link Debug Adapter User Manual
Oct 24, 2019 - 1 - Revision V1.01
Nuvoton Nu-Link
Debug Adapter User Manual
The information described in this document is the exclusive intellectual property of
Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.
Nuvoton is providing this document only for reference purposes of NuMicro microcontroller based system
design. Nuvoton assumes no responsibility for errors or omissions.
All data and specifications are subject to change without notice.
For additional information or questions, please contact: Nuvoton Technology Corporation.
www.nuvoton.com

Summary

Introduction to Nu-Link Debug Adapter

Nu-Link Debug Adapter Hardware Specifications

Nu-Link-Pro Specifications

Details the Nu-Link-Pro, a full-functional debugger and programmer.

Nu-Link Specifications

Describes the Nu-Link as a basic debugger and programmer.

Nu-Link-Me Specifications

Introduces the Nu-Link-Me, a simple debugger and programmer.

Nu-Link2-Me Specifications

Details the Nu-Link2-Me, a simple debugger/programmer with VCOM.

Nu-Link Adapter Feature Comparison

Provides a comparative overview of Nu-Link adapter hardware features.

Key Functions of Nu-Link Debug Adapter

Debugging Functions

Explains the debugging capabilities of the Nu-Link Adapter.

Programming Features

Details the programming functions of the Nu-Link Adapter.

Wide Voltage Programming

Describes the wide voltage programming feature.

Nu-Link Adapter Driver Installation

Guides on installing the Nu-Link Adapter driver.

Nu-Link Adapter Installation and Setup

Connecting the Nu-Link Adapter

Explains how to connect the Nu-Link Adapter to a computer.

ICP Tool Setup

Guides on setting up the Nuvoton NuMicro® ICP Programming Tool.

Keil MDK Setup

Details the setup for Keil MDK debugger and programmer.

IAR EWARM Setup

Explains setup for IAR EWARM debugger and programmer.

NuEclipse GCC Setup

Covers the NuEclipse GCC setup for debugging.

Appendix: Nu-Link Adapter Details

Nu-Link Adapter Operating Current

Lists operating current specifications for Nu-Link adapters.

Automatic IC Programming System

Describes the automatic IC programming system.

Document Revision History

Nuvoton Nu-Link-Pro Specifications

General

Interface	USB 2.0
Debugging Protocol	SWD, JTAG
Power Supply	USB powered
Supported Interfaces	SWD, JTAG
Debugging Support	Yes
Programming Support	Yes
Operating Temperature	0°C to 70°C
Supported Devices	Nuvoton NuMicro Family
Operating System Compatibility	Windows, Linux
Target Voltage	1.8V - 5.5V
IDE Support	Keil MDK, IAR EWARM