NXP Semiconductors S32K142 - S32 K142 EVB Jumper Settings

EXTERNAL USE
5
Jumper Settings
Jumper Configuration Description
J104 1-2
2-3 (Default)
Reset signal to OpenSDA, use to enter into
OpenSDA Bootloader mode
Reset signal direct to the MCU, use to reset
S32K142.
J107 1-2
2-3 (Default)
S32K142 powered by 12V power
source.
S32K142 powered by USB micro
connector.
J10 2-3 (Default)
1-2
MCU voltage 5v
MCU voltage 3.3v