EXTERNAL USE
7
S32K142 EVB RevC. LIN Phy errata.
• Errata: the LIN phy on S32K142EVB is connected to S32K142’s pins 32/31 which don’t support
LPUART.
• Workaround: Connect MCU’s pin 29 to LIN Phy’s LIN_TX trace and MCU’s pin 30 to LIN Phy’s
LIN_RX trace at PCB level. This can be done by removing R131 and R130, connecting pad 1 of
R132(DNP) to pad 2 of R131 and pad 2 of R130 to MCU’s pin 30 via, as shown below.
Note: this errata is already fix on
newest EVB version.
To Next Page
Loading...
