NXP Semiconductors S32K3X4EVB-Q172 - Page 7

NXP Semiconductors
S32K3X4EVB-Q172 HWUM
S32K3X4EVB-Q172 | S32K3X4EVB-S172 - Hardware User Manual
S32K344EVB-Q172 | -S172 HWUM
All Information provided in this document is subject to legal disclaimers
© NXP B.V. 2020. All rights reserved
NXP Semiconductors
REV A – 10/2021
Page 7 of 31
a)
- The power switch -SW1 must be in OFF position before to the EVB be connected to an external power supply.
b)
- Once the power switch -SW1 is in OFF position, then the EVB can be connected to an external power supply.
c)
- Now the power switch -SW11 can be changed to ON- position.