12
eAdvantage User Manual (15PL1033 Rev. 7, July 2022)
1
4
2
3
Attach the N
2
O
input hose here.
Insert power
Supply plug here
Attach the
O
2
input hose here.
Attach a new patient
circuit and monitoring line
to the device here
Fig. 1 Connecting the Supply hoses, Patient Circuit and Power Supply
WARNING
Using a wrench or applying excessive force in tightening the supply hose
may damage the seal or the thread of the connection.
Note: Power supply cords are available for most countries. Please
specify the country of use at time of purchase.
Should external power be lost, the device will automatically switch
to internal battery power (providing the battery is charged) and the
green battery LED on the left of the front panel will illuminate.
To Next Page
Loading...