Oakton pH 610 User Manual

74
1. Salinity Setup
Salinity setup screen presents many options to control the operating parameters,
which can be controlled and set from the salinity setup screen. The settings are
displayed in 2 pages. Press NEXT-P (F2) and PREV-P (F1) to navigate through
these pages.
Salinity Settings – Page 1
Figure 33: Salinity Settings - Page 1
This page allows you to set operating parameters for salinity measurement. The Pure
water coeff, Lnr Temp Coefficient, normalization temperature, cell constant,
calibration due, calibration points are set the same way as previously described in
Conductivity set up.
Salinity Settings – page 2
Figure 34: Salinity Settings - Page 2

Oakton pH 610 Specifications

General

Brand	Oakton
Model	pH 610
Category	Measuring Instruments
Language	English