14
Run Time
•
Use the UP & DOWN arrow keys to adjust value.
•
Use the Select key to change between HR and MIN.
•
Run Time is a safety feature while the control is in the ON / OFF or PID mode. The user can
set a timer to have the output turned OFF if the time expires.
Power Failure Control
•
Default value is RESUME. Use arrow keys to change value.
•
Options: STOP – If control losses AC power during operation, process will be stopped when
AC power is restored to the control. RESUME – If control losses AC power during operation,
the user will be alerted with four audible beeps and the process will continue with power to
output ON when AC power is restored.
To Next Page
Loading...