19
Specification: Models 89800-02
•
Data retention upon power failure via nonvolatile memory.
P
OWER
I
NPUT
230VAC +/-10%
50/60Hz. +/- 3%
10 Amp
2300 Watt MAX LOAD
Operating Environment
Maximum Altitude
Pollution Degree
Installation Category II
0 to 90% relative humidity, non-condensing
32 to 77
o
F / 0 to 25
o
C
2000m
2 (Normally only non-conductivity pollution occurs)
Local Level (Connect to branch circuit and not directly to a
main circuit, such as a fuse panel)
Storage
0
o
C to 60
o
C
Relative Humidity 5 to 80%
Non-condensing at 30
o
C
Fuse
250 Volt, 10 Amp rated (Fast-acting)
AC Line Cord
SJT-14-3 14 AWG, 15 Amp, 240 VAC, less than 3 meters in
length
Heater/Cooler Output
Max Voltage: 230 VAC +/- 10%, 15 Amp, 50/60 Hz +/- 3%
3450 Watt Max Load
Compliance
120VAC to 240VAC
230VAC (For CE mark)
UL File E207546, Vol. 1
To Next Page
Loading...