22
Maintenance/Cleaning
Simple preventative maintenance steps include keeping the controller clean. Protect it from over-
load, excessive dirt, oil and corrosion.
Cleaning: If cleaning is necessary, use only a damp cloth with water only. Wipe only the exterior of
the control chassis.
Warranty
Oakton Instruments, for itself does hereby offer a warranty for products from the date of receipt by
the user, under normal and proper usage, against defects in workmanship and materials for 12
months, and will repair or replace any defective part(s) without charge when same is shipped Pre-
paid to Oakton Instruments from which the product was originally purchased.
Should the nature of any defect require that the product, or any constituent portion thereof, be re-
turned to Oakton Instruments, Vernon Hill, Illinois, prepaid for service, a condition precedent to
any return shall be the procurement of authorization from Oakton Instruments assigning a Return
Goods Number to the product or part requiring service.
Parts and accessories manufactured by others are warranted only to the extent of the regular war-
ranty of the manufacturer or supplier of such materials and only insofar as Oakton Instruments is
able to transfer the benefits of warranty coverage, if any, to the user. Any adequately warranted
defective part or accessory manufactured or supplied by others may be exchanged through Oak-
ton Instruments for a replacement part is shipped prepaid and received at Oakton Instruments
within 30 days from the date any replacement part is obtained by the user.
This warranty supersedes and is given in lieu of all implied warranties, and is void if the user caus-
es damages from improper usage of product under normal operating conditions.
12 MONTHS LIMITED WARRANTY ON ALL PARTS AND LABOR IS GIVEN BY OAKTON
INSTRUMENTS.
CATALOG NUMBER 89800-01 & 89800-02
SERIAL NUMBER _________
DATE OF PURCHASE _______________
8/302013 rev. 5
To Next Page
Loading...