3
Safety Precautions
DANGER: DO NOT REMOVE COVER! HIGH VOLTAGE IS PRESENT IN THIS
CONTROL. Contact vendor for service.
DANGER: If high voltage is present on external temperature sensor from out-
side source, high voltage will be present at the control.
DANGER: Fire protection and control damage: Replace all fuses with the cor-
rect fuse replacement. Reference page 18 for Model: 89800-01 and page 19 for
Model: 89800-02.
WARNING: Specifications for the power cord: See page 18 for Model: 89800-
01 and page 19 for Model: 89800-02 for proper replacement cord. Additional in-
put power cords for various countries are listed on page 23.
WARNING: Use of separate temperature limit control is recommended were a
fault condition could occur and result in a fire or other hazardous condition.
To Next Page
Loading...