Program
09
- Pressure Mod
"rpcggiation
Same
as Program 00, but with tempo and duration controlled by keyboard pressure.
• Play and hold chords/notes, and while holding those notes, use keyboard
pressure to simultaneously control the tempo and duration
of
the resulting
notes.
Proglam
to -
Emersonic
Same
as
ProgH\1lJ
02, but with an 8-stage automatic transposition through intervals
bascd on a
"V,
VII, IV, VII,
octave
V, I, IV, VII" progression.
• Use keyboard pressure to vary betwecn staccato and legato.
•
Works very well
withh
sampled piano.
Program I I -
Random
Notes
Same
as Program
00,
except that the order,
number
of
held-notes-at-a-time, and pulse
timing
of
the arpeggiation are random.
Program
J2 - One-track Sequence Record/Playback
This program starts playing the contents
of
memory as soon as it is selected to
dcmonstrate lhal just
selecling the program is
a1l
it
lakcs to start playing; you don't
need to manually tum cloning on.
t)
Recording up to 32 notes:
• Connect the Pedal
t
jack
to one
of
the audio inputs on
your
mixer for a
meU'onome click.
• Press the "Record/I lold" switch, causing its
LED
to flash at the current
tempo.
• Press the "Clone" switch, causing its
LED
to light.
If
hooked up, the
metronome should now be audible.
Use
Tempo
Tap
to adjust
tempo
as
desired.
•
The
Cyclone
will start recording
when
you start playing, automatically
placing the first note
on
the first beat, and quantizing note-ons to the
nearest 16th note.
• Press "Clone" to stop recording,
or
"Record/Hold" to
stop
and
automatically begin playback.
• By starting recording,
or
resuming Recording, the
C)'clone
erases
any
previous recording,
so
additional takes can be started immediately.
2) Playing back a previously recorded sequence:
• With the
"Record/llold"
LED
turned off, press the "Clone" switch.
•
Use
the "Cyclc" switch to control
whcther
the
CJ'clone
loops the
recording
or
plays it only once.
• Duration Modulation has
no
effect.
•
To
hear the Factory
Demo
sequence. first select (User) Program
16
to
redefine the Record Buffer
(if
any prior Recording/Holding has been
happened since
lIard
Reset).
Quick
Start
Page 7
To Next Page
Loading...